You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... ... more | go to store |
PRIME-LINE B 702 1 in. Steel Screen Door Roller (2 Pack) Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This steel housing and... ... more | go to store |
This is a plain back tandem roller assembly used by Smith and Carry and a variety of other sliding patio door manufacturers of metal framed patio doors. It has an in-line tandem inner housing with 1-1/2 in. concave steel ball bearing rollers set in a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball-bearing roller. It has a plain back housing that is 3/4 in. wide and 1-1/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 23/32 in. wide with a 3/4 in. dimple width and 1-3/16 in. tall. It is rear adjusting with a threaded... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
This is a plain back tandem roller assembly with a 1/4-20 threaded mounting hole and two narrow mounting slots on the back end. These slots slide onto an opposite shaped extrusion on the door frame. The adjustable stamped steel housing is 11/16 in.... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a unique back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The housing is 13/16 in. wide with a 1-1/8 in. flare, 1-15/32 in. tall and 4-1/2 in. long. It has two machine threaded mounting screw holes... ... more | go to store |
D 1876 is a Unique Housing tandem roller assembly often found on Andersen patio doors as well as several other manufacturers of wood patio doors. It has two 1-1/2 inch concave steel ball bearing rollers set in a stamped steel housing with side... ... more | go to store |
This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16... ... more | go to store |
This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside... ... more | go to store |
This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved (center grooved) edge and features a steel inner race and steel ball bearings. The outside diameter of these rollers... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... ... more | go to store |
This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end.... ... more | go to store |
This Bi-Fold Door Spring Loaded Top Guide is constructed from steel. It features a spring loaded nylon guide with a top mount design. This style pivot is used with older styled Johnson Hardware parts. | Prime-Line Bi-Fold Door Top Roller Guide, Stamped... ... more | go to store |
This Spring Loaded Bi-Fold Door Top Guide is constructed from nylon and features a steel bracket. It features a top mounted, spring loaded, design that is easy to install. | Prime-Line Bi-Fold Door Top Roller Guide, Stamped Steel Base, Nylon Roller... ... more | go to store |
This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
These Fix-A-Latch strike plate repair kits are constructed of stamped steel with white plastic and they come in optional plated finishes. Kits like these can be used to easily repair a door that fails to latch when it is closed. Each kit includes a... ... more | go to store |
This is a plain back tandem roller assembly with two 1 in. concave ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is 11/16 in. wide, 1-1/32 in. tall... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back tandem roller assembly used by a variety of patio door manufacturers of metal or vinyl framed patio doors. It has two in-line 1-1/4 in. concave Plastic ball bearing rollers set in a stamped steel housing with rear adjustment. The... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a unique back housing made of extruded aluminum. The housing is 7/8 in. 1-3/16 in. tall and 2-1/16 in. long. This style of unique... ... more | go to store |
This mirror door roller is constructed from nylon. It comes attached to an adjustable steel housing. This type of roller fits on Contractors mirror door. | Prime-Line Mirror Door Roller Assembly, 1-7/16 in. Roller, Steel Housing & Ball Bearings,... ... more | go to store |
This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
This is a C-tab tandem roller assembly with 1-1/8 in. steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 9/16... ... more | go to store |
This is a reversed F-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/8 in. tall with a flare width of 13/16 in.. There are two 1-1/4 in. concave or grooved steel ball bearing rollers. Used by Fleetwood and a... ... more | go to store |
This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This tandem wheel roller assembly is constructed of a pair of steel wheels and an adjustable steel housing. Each wheel has a concaved edge and features a steel inner race, steel ball bearings and a 5/16 in. roller width. The outside diameter of these... ... more | go to store |
This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
This is a unique tandem roller assembly with two 1-1/4 in. concave steel ball-bearing rollers installed. The square-shaped housing is 11/16 in. wide, 1-1/2 in. tall, and 4-1/2 in. long. It has an end adjustment screw and two mounting tabs at each end... ... more | go to store |
Ads related to Prime-Line Tandem 1-1/2 in. Steel Roller, Plain Back, Stamped Steel Housing Single Pack in Yellow | 7.44 H x 3.81 W x 1.13 D in | Wayfair D 1904